A+ | A- | Reset
Blades
"No matter what you cut, what it cost matters most"
ITL Ambassador M42
ITL Premier M42
ITL Endura M-51
ITL Superia M-71
ITL-Magnum Carbide
Other Products

Selecting the correct Blade: The most important aspect that should be focused upon before cutting process, is selecting the most appropriate blade. Proper selection brings out maximum productivity and enhances the optimum tool life. Doing the correct dimensions and TPI in case of a band saw blade is thus very essential. Special tooth design can be applied to achieve better results in sawing difficult to cut materials.

Selecting the correct TPI: Pitch selection/ plays a very important role. A general guide line is given below to achieve better result.

Variable Pitch teeth/inch (tpi)
*For intermittent cuts contact our technical services department
Break in Procedure
All new blades possess very sharp teeth edges. This causes micro fractures at normal cutting rate due to excess vibrations. It is recommended that approximately 20 minutes of solid cutting or 300 sq. cm. of material should be cut at 40% of recommended feed at normal speed. Proper break-in, rounds-off sharper edges and ensures longer blade life.
 

Product Gallery

Testimonials

In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer's technical know-how from USA
 
In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer's technical know-how from USA
 
In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer's technical know-how from USA