A+ | A- | Reset
ITL MAGNUM CARBIDE
Back
Carbide tipped bandsaw blade is essentially used for sawing tough alloys such as Cobalt, Nickel, Zirconium and Titanium based metal with extremely good surface finish. Higher cutting rates can be achieved in cutting S.S., High Alloy and Tool Steels.
ITL MAGNUM CARBIDE
Dimension in mm Teeth per inch Dimension in inches
0.075/1.25 1.4/2 2/3 3/4
20 x 0.80       X 3/4 x 0.032
27 x 0.90       X 1 1/6 x 0.035
34 x 1.10     X X 1 3/8 x 0.042
41 x 1.30   X X X 1 5/8 x 0.050
54 x 1.60 X X X   2 1/8 x 0.063
67 x 1.60 X X X   2 5/8 x 0.063
80 x 1.60 X X X   3 1/8 x 0.063
Tooth Design K = Hook Tooth with positive rake angle, N = Neutral Tooth with 0 rake angle Standard pitch blades available on request.
 
 

Product Gallery

Testimonials

In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer's technical know-how from USA
 
In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer's technical know-how from USA
 
In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer's technical know-how from USA