Approx. Net Weight | 2900 Kg |
Brand | ITL |
Model Name/Number | ITL-450-LMGTV-K |
Automation Grade | Automatic |
Voltage | 440V |
Blade Size | 6600 x 41 x 1.3 mm |
Material | Mild Steel |
Phase | 3 Phase |
Square Cutting Capacity | 450 x 450 mm |
Saw Motor Capacity | 7.5 kW / 10 HP |
Round Cutting Capacity | 450 mm |
Min. Cutting Speed | 65 ft/min |
Max. Cutting Speed | 328 ft/min |
Hydraulic Motor Capacity | 1.5 kW / 2 HP |
Frequency | 60 Hz |
Coolant Reservoir | 140 L / 37 Gallon |
Coolant Motor Capacity | 0.18 kW / 0.24 HP |
Kant Angle Double Column Bandsaw Machine
Kant Angle Double Column Horizontal Band Saw Machine for Heavy Structural Steel Cutting Model ITL- 450 LMGTV K
- Anti Friction LMG bearings for smooth up-down movements of cutting head (blade).
- Hydro Mechanical Sensor to adjust feed without operator involvement depending upon material composition, hardness and cross section. Much superior and better technology than conventional hydro-mechanical blade sensor.
- Carbide face blade guides preciously manufactured and mounted carbide with anti friction bearings which does not require frequent alignment.
- Sturdy Split Main Vice helps in holding the job on both sides of cutting.
- Hydraulic Blade Tension for precise tensioning of blade for cutting. The blade tension is gradually released when power off to avoid falling of blade.
- Heavy Duty Gearbox with Taper Roller Bearings to take the side thrust load of blade tension easily. The drive output is very smooth which helps in getting very high blade life.
- High pressure coolant jets are provided for chips removal at very high cutting rates. Better cooling and chips removal helps is achieving high tool life and exceptional material removal rate (MRR).
- Ergonomic design of Electrical control panel and Hydraulic Power pack for ease of operation and maintenance.
- Infinitely variable pressure controlled cutting feed & upward return rapid movement by hydraulic cylinder.
- Auto height stop on return stroke of cutting arm.
- Automatically adjustable heavy duty carbide blade guides no need of manual frequent adjustments as the blade guides adjust automatically as per the job width.
- Hydraulically operated rotating cleaning wire brush.
- Hydraulically operated main vice.
- Cutting feed and rapid reverse of cutting arm. When the Hydraulic power of the machine is off, the tension on the blade is released, so as to avoid fatigue stresses.
- Automatic machine stops when blade fails.
- Hydraulic feed regulation for high productivity and enhanced tool life.
ITL Industries Ltd.
Machine Details
Application Name
In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer’s technical know-how from USA
Application Name
In the year 1999, ITL ventured in complete new segment of machine manufacturing where micron and metallurgy is of utmost importance and started manufacturing of Tube and Pipe Mills, Section Mills etc. ITL is hub for Tube Technology of leading manufacturer’s technical know-how from USA